Scraper Models > S12HD and S14HD
 
Options Available
• tilt axle
• articulating tilt axle
• warning light kit
• laser mount
• replaceable bushings on swivel hitch
• rear hitch
• available in blue or cat yellow
The model S12HD feedlot/construction scraper dumps at 31 inches. Standard 12 ft. model (shown here) weighs 9,000 lbs.    

Go to Specifications

 
4X20 hydraulic cynlinders 2 inch cross pins
3.25 axle pivot pins (REPLACABLE BUSHINGS)


     
 
Massive 10 bolt oil-filled 15,000LB hub and spindle
4X10 tilt cylinder
     
 
Available in 10ft., 12ft., 14ft., and 16ft. wide in both cat yellow and blue

Specifications
 Designs are subject to change without notice.
Side
Plate		 Cut
Width		 Weight Overall
Width		 Dump Height Capacity Tire
Size		 Tilt
Axle		 HP
Required
Model S12HD
1 INCH 12ft 9000 lbs 12ft 2" 31" 7.7 yards 16:00-20 standard 200 to 350
Model S14HD
1 INCH 14ft 11000 lbs 14ft 2" 31" 9 yards 16:00-20 standard 225 to 400

*Wider models avalible upon request



©2005 Manco Manufacturing, Inc. ~ All rights reserved.

Site designed and hosted by SculptNET Web Site Development, Inc.